globalmetalfinishers.com

    Services

    Our Technical Advice and expertise is available for you to draw on completely free of obligation, we will use our experience to ensure that you select the right metal finishing solution for your required application.

    We can process all finishes on Aluminium, Brass, Zinc, Mild Steel and Stainless Steel substrates

    Services
    Polishing
    Powder Coating
    Barrel Electro plating
    Alloy Wheel Refurbishment
    Assembly & Supply Chain Management
    Refurbishment & Stripping
    Rack Electro Plating
    Electrophoretic Coating
    Pre-Treatment
    Air Dry & Wet Paint

    Polishing

    Top

    Our onsite polishing facilities include

     

  • Manual Polishing
  • Any requirement for hand polishing on high Quality components can be undertaken.
  • Brush Finishing
  • Brushed Stainless Steel effects can be imitated using sateen and Scotchbrite Mops.
  • Linishing
  • We linish only when preparing product for powder Coating and for Split Line removal
  • Centreless tube polishing
  • We can undertake the Linishing and Polishing of Tubes up to 2.4m in length.
  • Vibratory Finishing
  • Various degrees of finish from dull to mirror finish can be achieved. Also used for deburring.
  • Flat bed linishing.
  • We can produce very fine linishing and polishing on flat plates using in house equipment.

     

    It is general practise for high quality products to be highly polished prior to plating.

    Powder Coating

    Top

    A full range of powder coating facilities is available for both functional and cosmetic applications. Powder can be applied in Epoxy, Epoxy-Polyester & Polyester in standard and anti-microbial / anti-bacterial finishes. Our Plant is capable of powder coating up to 2m in length and runs both manual and fully automated systems allowing for both high and low volume product in any RAL, BS or PANTONE finishes.

    Click here to see colour charts

    Barrel Electro plating

    Top

    Our Electro plated services extend to offer the following barrel plated finishes over 2 fully automated plants with the latest in Computer controlled Artificial Intelligence with a capacity of approx 10 Tonnes per day over a 24 hour period. Please see below list for all available finishes.
    Alkaline Zinc with Clear/Blue, Black and Yellow Passivates with PS100 Sealant. All our passivates are trivalent and RoHs Compliant. Our Full Enhanced trivalent passivate with PS100 seal has exceptional corrosion resistance exceeding 500hrs on neutral salt spray to first red corrosion.

  • Zinc and Clear/Blue
  • Zinc and Clear/Blue with PS100 Seal
  • Zinc and Black
  • Zinc and Black with PS100 Seal
  • Zinc and Full Enhanced Yellow
  • Zinc and Full Enhanced Yellow with PS100 Seal

  • Copper, Nickel, Brass and Tin Finishes are processed on line 2.  Copper, Tin and Brass finishes are excellent for conductivity purposes. Nickel is more commonly used for cosmetic purposes.

  • Copper Only
  • Copper and Tin
  • Copper, Nickel and Brass
  • Copper, Nickel and Tin
  • Nickel Only
  • Nickel and Brass
  • Nickel and Tin
  • Brass Only
  • Tin Only
  •  

    For any further information please contact us.

    Alloy Wheel Refurbishment

    Top

    We can fully refurbish Alloy wheels that have had damage to rims and paintwork. A Choice of coating colours is available for final finishing.

    Assembly & Supply Chain Management

    Top

    An additional service we offer is the undertaking of ‘primary’ or ‘secondary’ operations that may be required prior or post finishing. The list below is not exhaustive and we will be more than happy to discuss your individual requirements. Please contact us for more information.

     

  • Dis-assembly & re-assembly of product prior to and post finishing.
  • Purchase of Raw Casting and subsequent resale to customer in finished and/or assembled condition.
  • Assembly of fixture packs.
  • Management of Laser etching Services.
  • Managemnt of Laser Cutting Services.
  • Undertaking of Brazing,Soldering and Welding services.
  • Holding of finished and raw stock for consignment or Kanban purposes.
  • Design and manufacture of packaging.
  • Forward delivery management – managing and delivering your product to your customer direct from our factory.
  •  

    If we can take the management headache out of any process, we are more than happy to do so.

    Refurbishment & Stripping

    Top

    We have extensive onsite stripping facilities that cater for all material substrates. We can strip to base all electroplated finishes including PVD (Physical Vapour Deposition). Our expertise in metal finishing has allowed us to take pre-plated material and refurbish to as ‘New’ condition. Our particular strengths within this field are fully utilised by the Brewery Equipment remanufacturing industry, Together we provide solutions by bringing previously sub-standard damaged units ack into mainstream use.

    Rack Electro Plating

    Top

    We are able to offer the following finishes in a rack plated process to maximum dimensions of 58” length x 36” deep x 12” wide. All our plating is processed by a team of trained individuals and the whole process is overlooked by our own in-house chemist.  A basic overview is outlined below.

     

  • Hexavalent Chrome (HEX)
  • A bright reflective ‘bluish-white’ coating. High protective Qualities .Non RoHs Compliant.
  • Trivalent Chrome (TRI
  • A bright reflective ‘brownish-white’ coating, a RoHs Compliant ~HEX Chrome Alternative.
  • Bright Nickel
  • A Bright reflective Silver/yellow, often used as an undercoat for many alternative final coating.
  • Dull Nickel
  • Dull non-reflective Silver/yellow finish used predominantly in engineering applications for protection.
  • Duplex/Semi Bright Nickel
  • Used as an undercoat for Bright nickel for high Corrosion Resistance. Service Condition 4 applications.
  • Gold (Light)
  • Applied on a nickel coating, used commonly for domestic sanitryware and conductivity purposes.
  • Gold (Dark)
  • Applied on a nickel coating, used commonly for domestic sanitryware and conductivity purposes.
  • Silver
  • Dull or Bright in appearance, used as an overcoat to copper or nickel to aid in conductivity.
  • Satin Nickel
  • A soft yellowish brown finish, also known as ‘Velous’ & ‘Pearl bright’.
  • Satin Chrome
  • Soft Blue Finish achieved by HEX or TRI chrome plating over Satin nickel.
  • Satin Gold
  • A Soft Gold Finish achieved by Gold plating over Satin nickel.
  • Cyanide Copper
  • Reddish/Pink in appearance used as a base coat for steel and Zinc based substrates.
  • Acid Copper (Heavy Deposit)
  • Reddish/Pink in appearance, used to aid porous casting, excellent conductivity properties.
  • Satellite Satin Chrome
  • A bright reflective ‘Milky’ blue finish, nickel based undercoat with HEX or TRI chrome topcoat.
  • Electroless Nickel
  • Bright Uniform coating providing excellent corrosion resistance qualities. Can be top coated.
  • Bronze
  • Brown in appearance, a ‘living breathing’ finish which ages with time and environment unless protected.
  • Antique Bronze
  • Brassy Brown in appearance, achieved by brushing back bronze plated components.
  • Brush Nickel
  • Stainless steel effect finish, achieved by brushing back nickel plated components.

     

    These finishes’s can be processed to Service Condition 2, 3, & 4 Specifications.

    For any further information please contact us.

    Electrophoretic Coating

    Top

    We provide clear electrophoretic lacquer coatings with post dye treatments if required over base material and pre-plated components. This particular type of coating is most commonly applied as a top coat providing a tough surface layer protection which conforms closely to the contours of the work piece. Most commonly used within the architectural hardware industry post dye treatments can give very close resemblance to brass and gold finish’s at a fraction of the cost.

    Pre-Treatment

    Top

    It is general practise for high quality products to be highly polished prior to plating.

     

  • Shot blasting
  • Phosphating
  • Bead Blasting
  • Vapour Degreasing
  • Acid Dipping
  • Air Dry & Wet Paint

    Top

    Alongside our Powder Coating Plant, we are able to offer both Air Dry and Wet Paint Finishes,

    globalmetalfinishers.com